Driveway pavers in Bonita Springs FL - a drive that stays tight and flat
Pavers sinking, shifting, or a cracked slab you're tired of? We build the base and edges first so your new drive holds together.
Request an estimate
What goes into a paver driveway in Bonita Springs?
A paver driveway in Bonita Springs is concrete pavers set over a dug-out, packed base with a firm edge around it, and built right, it gives you a drive that holds together under your cars instead of sinking where the tires roll.
Most people who call me have a cracked concrete drive or old pavers that have dropped or spread, and they want it done once. The price moves with the size of the drive, how deep the base has to go, whether an old slab comes out first and which paver and pattern you pick, and the schedule mostly turns on the permit and the summer rains. I measure on site and put your number in a written estimate, and if you want the path to the front door redone to match, we handle walkway construction too.
How we build a paver driveway
We start by laying out the shape of the drive with you and getting the utility lines marked, then we dig out, compact the soil, and spread and compact the base in layers. Next comes the edge restraint, then a smoothed bed of sand, then the pavers, cut in tight at the edges with sand worked into the joints. My bids name the base depth and the edge restraint, because those two things decide whether a paver drive stays tight, and for drives I lean toward herringbone, a zigzag pattern that locks each paver against its neighbors where tires turn.
A new drive often touches the rest of the yard. If it runs along a slope or a raised bed, retaining wall construction holds the ground back so it doesn't wash onto the pavers, and worn brick or stone columns at the entry can be brought back to match with masonry restoration.
Driveway pavers in Bonita Springs and the ground under them
When you apply for a driveway permit for a paver drive, Bonita Springs asks for a hold harmless agreement with the application, and you can read the requirements on the city's driveway permit page. When a job needs a permit, we check with the city or county office for your address and file it ourselves. We keep you posted, and work starts once the permit is in hand.
Water is the other local factor. An older Lee County soil survey found that in undrained parts of one soil area it mapped, the water table sits within 10 inches of the surface for 1 to 4 months in most years and drops below 40 inches in the dry season, and drainage ditches change how high it comes up. That's background for parts of the county, not a reading of your lot, but it's why I look at how your ground drains before I set the base depth in the bid. We're based in Bonita Springs and work north into Lee County and south into Collier County, and we plan for the same wet-season ground on drives in Estero and San Carlos Park.
Paver driveway work
Get a written estimate for your paver driveway
We reply within one business day to set a time for me to come out. I'll look at the drive, measure it and write you a free estimate, with no obligation to go ahead.
(239) 256-7568Paver driveway questions from Bonita Springs
How long does a paver driveway last, and what upkeep does it need?
Installed properly, a paver driveway needs little upkeep and can give you a good-looking surface for decades. Cars and foot traffic will still bring dirt, stains and wear over the years, so plan on cleaning now and then, and know that the install matters as much as the paver itself.
How much does a paver driveway cost in Bonita Springs?
The cost comes down to the size of the drive, the base depth your ground needs, the paver and pattern you pick, and whether an old slab has to be broken out and hauled off first. Herringbone takes more cuts at the edges than a straight pattern, and a wider apron or extra parking pad adds area. I'll measure on site and give you the number in writing.
What is the best paver pattern for a driveway?
Herringbone at 45 or 90 degrees is what industry guidance recommends where cars drive constantly, because it gives the most interlock and strength. Either angle works on a drive, so pick the look you like.
What causes driveway pavers to sink or spread apart?
Usually a base that's too thin for car traffic or an edge that can't hold the pavers in. Industry guidance sets a thicker minimum base for driveways than for walks, sometimes thicker still depending on the site and traffic, and flat metal or plastic edging like you'd see around a flower bed gives too little side support to keep a drive tight.
Who can apply for building permits in Bonita Springs?
Contractors who register with the city's Building Department can apply for building permits in Bonita Springs. Registering takes an active state license or a Lee County grandfathered local license where the law requires one, plus proof of liability insurance, so it's a fair thing to ask any paver contractor before you sign.
Are permeable pavers a good fit in Bonita Springs?
Sometimes, but federal highway guidance says permeable interlocking pavers generally aren't used where groundwater sits within 2 feet of the bottom of the pavement. With the high wet-season water table found in parts of the county, it's worth finding out how close groundwater sits under your drive before you choose them, and I'll go over that with you on site.
Get your Bonita Springs paver drive priced
Call (239) 256-7568 or send the form with your address and rough driveway size, so I come out already knowing what to look at.