Masonry contractor in Golden Gate, FL - walls and joints built once, built right
Select Bonita Springs Masonry & Concrete is a masonry contractor working in Golden Gate, FL. We repair cracked block and worn mortar joints and build garden walls, paver driveways and walkways on the block homes here.
Golden Gate as we see it from the job site
Golden Gate City sits inland from Naples. It's a grid of residential streets that the county's own planning work bounds by Green Boulevard, Collier Boulevard, Santa Barbara Boulevard and the Golden Gate Main Canal. Most of what we pull up to is single-family block homes finished in stucco, with duplexes and small apartment buildings mixed in and shops along Golden Gate Parkway, and canals run behind a lot of the back yards.
We come up from Bonita Springs for this work, and it's the same block, brick and paver work we do out in Orangetree. With block houses and block garden walls on most lots, the job here is usually about the block itself, so the first visit goes to working out what moved and why before anyone talks about tearing anything out.
Who issues permits in Golden Gate and what to check before you hire
Golden Gate City is unincorporated, so building permits here come from the Collier County Building Division, not a city hall. When a job needs one, the county's review sets the start date more than our crew does, so it's the first thing I sort out. Before you hire anyone, check their state contractor license and their Collier County business tax receipt, which the county Tax Collector says every business working anywhere in the county must have.
We're licensed and fully insured, and we're based in Bonita Springs and work the cities around it, south into Collier County and north into Lee, so Golden Gate is regular ground for our crew. What moves the price is mostly the size of the job and how much old work has to come out before new work goes in, and you get your own figure in the written estimate after I've seen it.
What Golden Gate houses and yards usually need
A lot of Golden Gate homes have some years on them now, and the brick and stone around the stucco, on entry columns, planters and mailbox posts, is often where the wear shows first, in sandy, crumbling joints and loose units. We do brick repair and repointing on that trim so it matches what's already there, and if a planter or column is too far gone to save, I'll tell you a rebuild is the better money.
Out back, the calls are usually block garden walls, privacy walls, paver drives and walkways. The ground on most lots is sandy fill, so we put the effort into the footing and the base, because that's where walls lean and pavers sink when the work gets skimped.
Get a written estimate for your Golden Gate job
We reply within one business day, and the estimate is free, done on site and comes with no obligation. After you send the form, we set a time for me to come out to your Golden Gate property, look at the job myself and write down what it needs and what it doesn't.
(239) 256-7568How it works when you call us about a Golden Gate job
Tell us about the job
Call (239) 256-7568 or use the form and tell us what you're seeing and where it is on the property. A couple of photos help me know what to look for.
I look at it myself
I come out to your house, check the wall, joints or slab, and tell you straight what it needs. If part of it isn't worth fixing, you'll hear that from me too.
Get a written estimate
You get the scope, the materials and the price in writing. You decide from there.
We handle the county permit
If the job needs a permit, we check with Collier County for your address and file it ourselves. We keep you posted, and work starts once the permit is in hand.
Build, check and clean up
Our own crew does the work, and I'm on site checking it as we go. We clean up before we call it done.
Block, brick and stone work
Golden Gate masonry questions we hear
Do I need a permit for small masonry work in Golden Gate, FL?
Sometimes not, but only if the job fits Collier County's exemption for certain qualifying work valued under $7,500 on a single-family detached house outside a flood hazard area, with no structural, mechanical, electrical, plumbing or gas work in it. To use it, you send the Building Division a written request for a permit exemption with the contract showing what the work is and what it costs, and staff issue a letter if they approve it. The county's list also covers nonstructural repairs by a licensed contractor up to $1,500 in labor and materials. Most wall and foundation work is structural, so I'll tell you at the estimate which side your job falls on.
How do flood rules affect a masonry project in Golden Gate?
If your property is in the Special Flood Hazard Area, Collier County has to review the development there, and the small-job exemption above doesn't apply. For a new home, mainly in the AE, AH and A zones, the state building code puts the lowest living floor above base flood elevation plus 1 foot, and the county also sets it 18 inches above the crown of a paved road or 24 inches above an unpaved one, so that height is settled before we lay any foundation block. You can look up your address on the county's floodplain map and elevation certificate search, and FEMA's newer maps were still preliminary as of August 2026, so the county's current map is the one that applies.
What does a certified contractor license mean in Florida?
A certified license from the state lets a contractor work anywhere in Florida, while a registered license only covers the cities or counties where the holder has a certificate of competency. If a contractor tells you they're registered, ask whether that covers Collier County before they start on your Golden Gate house. We're licensed and fully insured, and you can check any contractor's license with the state as described above.
What causes cracks in block walls on Golden Gate homes?
Usually it's settling, a footing that was too small for the wall, or water getting in through failed joints and rusting the steel inside. A hairline crack in the stucco is often cosmetic, but one that's widening, stepping along the block lines or letting a wall lean means the wall itself has moved. I'll tell you which one you've got, and if it's cosmetic I'd rather say so than sell you a rebuild.
What is the best way to fix worn mortar joints on a house in Golden Gate?
Rake or grind the old mortar out to sound depth and repoint the joints with mortar that matches the old work in strength and color, because new mortar smeared over the top usually pops off. Mortar harder than the brick or block can crack the face of the units, so the match matters more than most people think. If most of the joints are gone or the wall behind them has moved, repointing alone won't hold it, and I'll say so.
How much does masonry work cost in Golden Gate, FL?
The cost comes down to how much old work has to come out, how much new block, brick or stone goes in, how easy it is for the crew to get to it, and whether the county needs a permit or flood review. Tight side yards behind fences, matching older block or stucco, and a repair that's really a rebuild all push the number up. Doing it right the first time is the cheapest way, because bad masonry costs you twice, and your own figure comes in the written estimate after I've looked at it.
Describe your Golden Gate job and property
Call (239) 256-7568 or use the form and tell us whether it's the house, a yard wall or something new, so the first visit goes straight to the problem instead of guessing at it.